[Shotimes] Re: EATC temp reading mod

[Paul Nimz]

Well hopefully the previous link won't work.  Here is the correct one sorry.

http://makeashorterlink.com/?  I2CE12EB3

http://www.superford.org/registry/vehicles/index.php?vID=1647&fs=1&dni=1&vs0=
_4492_&vs1=&vs2=&s1=&s2=&s3=&s4=&s5=&s6=&s7=&s8=&s9=&s10=&s11=&s12=&s13=0&s14
=&s15=2451&s16=&s17=&s18=&s19=&s20=

Paul Nimz
'97 TR SHO
'93 EG mtx SHO




  ----- Original Message -----
  From: Paul Nimz
  To: `V6 SHOtimes
  Sent: Sunday, March 09, 2003 9:16 PM
  Subject: EATC temp reading mod


  I wired up a on-off switch to short out the outside temp button on the '93
today.  All works well and it is pretty easy to do.  Used some 20ga single
strand bell wire and soldered it to the terminals shown on the web page.  I
have the newer '95 version which is different than the original one in my '93.
I have included a pic of the '93 circuit board and where the two wires should
be soldered.

  http://www.superford.org/members/vehicles/s_mod.php?sID=4492&userID=2451&aT
ype=0

  Paul Nimz
  '97 TR SHO
  '93 EG mtx SHO