[Shotimes] A/C project almost done

[Steve Weinrich]

30 lbs?

Should be about 2 to 2.25 lbs installed.  You must have a static pressure
greater than 45psi in order to close the pressure cycling switch.

You may need to jumper the switch to engage the compressor clutch.  If you
do, you can get the R134 in there a little faster.

Steve

----- Original Message -----
From: <Pacfarm@aol.com>
To: <shotimes@autox.team.net>
Sent: Tuesday, March 11, 2003 6:06 PM
Subject: [Shotimes] A/C project almost done


> Guys ,first of all thanks to all who gave tech advice..........but now
were
> all powered up  A/C charged (30 lbs)  new compressor,air drier
etc......comp.
> does not blow cold..does not cycle as it should...and to top it off check
> engine light comes on .....
>      any suggestions????......Thanks
>
>
>       Art Campbell
>      94 ATX...(R-134a)
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes