[Shotimes] Re: SHO items for sale

[Lpsanford@aol.com]

I am cleaning a few things out of the garage this spring. I thought the list 
might want a shot at these before they go to ebay.

SHO items for Sale: All items fit Gen 1 SHOs shipping is extra. Pictures are 
available upon request. Most prices are not negotiable. Take what you need 
before they go to Ebay in 10-14 days. Contact me privately for details or 
questions.

One  LOS PCM with correct Super Chip: this is a drop in torque boost for any 
stock Gen 1 car (you will feel the difference) This is a PCM and a Super chip 
combined. $130

One LOS PCM with LPM module with 2 EPROMS. You can get one reprogrammed from 
Ted while you continue to drive with the other. This is a PCM plus LPM. Note 
the eproms are programmed for stage 2 cams and will need to be reflashed to 
your exact application and modifications $200.

One set of Hypertech underdrive pulleys-replaces lower pulley and alternator 
pulley to reduce accessory drive losses and over spinning the alternator. 
$100   

One 20.8 mm front sway bar and new stock rubber bushings. This is the perfect 
bar to eliminate the characteristic front end plow or push with the 24/26 
setup. Only use this bar with a non-quaifed MTX. I have used this setup with 
Eibach springs and can say that the balance is excellent. The softer front 
bar will help keep the inside front wheel down on the pavement in the tighter 
turns reducing exit wheel spin. $50.

One pair of 3.0 L heads with FPS port work and FPS heavy duty valve springs. 
There are no cams with these heads. They are very clean due to the use of 
synthetic oil. These heads are very nicely port matched to the intake and 
exhaust  manifold gaskets. I believe they were prepped by Shawn at IPT. I was 
told that the valve guides and seals were replaced around 10K miles ago when 
the heads were setup. These heads are not perfect. Cylinder #1 had a 
secondary throttle butterfly screw imbed in it. The screw has been removed 
and the ding was smoothed out. Several of the M7 X 1.0 cam bearing cap 
retaining bolts have stripped.  All have been carefully repaired with M8 X 
1.0 heli coils and new bearing retaining cap bolts. The heads are not warped 
and I would not anticipate any further durability issues with them. These 
would be very stout heads for a 3.2L MTX conversion or a stage 1 cam upgrade. 
$200

Dual remote oil filter setup with oil cooler. This includes remote dual oil 
filter mount, oil filter adapter, oil cooler, and hoses. $200. 

Two 5 X 7 coaxial  JBL GTO series  package  tray speakers. These were used 
less than 3 months several years ago. Like new condition $35.

Complete Cold air intake setup. This is a very nice setup that can be seen on 
the SHO Club website from the last convention. Look for the bronze and tan 
engine. It consists of a throttle body to 3" tube rubber elbow, mandrel bent 
3" tube with 2 bends, a tube to MAF rubber adaptor, a ProM 77 mm MAF 
calibrated to the stock SHO settings, and a new large K&N style conical 
filter. On my car the hole through the inner fender was enlarged and the MAF 
and air filter resided outside of the engine compartment and drew fresh air 
only. $450. The MAF alone is worth more than this.

Stock gear shift knob- like new condition. $35

Four 91 stock slicers in average condition (not great) with 215-60 Dunlop 
Graspic HS2 snow tires mounted. 5 blank 91 centercaps included. Tires are 
worn more than 50%. These are winter tires and wheels to put on your winter 
beater when things get bad. $200. 

Four 16 X 7 TSW EVO wheels with 225-50 Dunlop SP 8000s mounted. The wheels 
come with two different types center nuts (clear and blue annodized eight in 
total). All the tires appear to have 6/32" of tread left which is about 
perfect for several track days. These are excellent street as well with a 
nice ride and low noise and excellent all round grip. They are very 
predictable. The wheels are in good to very good condition. I believe there 
are 2 small rim nicks and two minor spoke scratches.  These are very sharp 
wheels.   $500.

Four Earl's stainless steel braided brakelines (new) $60.

One used 3.0L oil pump. This pump was switched out during a complete bearing 
change and it made more pressure with the old bearings than the new one does 
with the new bearings. Go figure. It should be in excellent condition.

Used Accel foam air filter $15

Colgan Bra-Good condition, used very little. $65

Rotunda valve spring compressor tool (part number T89P-6565-A) $85