[Shotimes] Re: SHO items for sale

[Bruce Malachuk]

I emailed you last night about the SS Brake lines, didn't hear back wanted
to "stake my claim" as to wanting to buy them.

Bruce
94 Opal Frost MTX -75k my baby
94 Deep Emerald Green ATX - 90k parts car

----- Original Message -----
From: <Lpsanford@aol.com>
To: <shotimes@autox.team.net>
Sent: Thursday, March 13, 2003 8:00 PM
Subject: [Shotimes] Re: SHO items for sale


> I am cleaning a few things out of the garage this spring. I thought the
list
> might want a shot at these before they go to ebay.
>
> SHO items for Sale: All items fit Gen 1 SHOs shipping is extra. Pictures
are
> available upon request. Most prices are not negotiable. Take what you need
> before they go to Ebay in 10-14 days. Contact me privately for details or
> questions.
>
> One  LOS PCM with correct Super Chip: this is a drop in torque boost for
any
> stock Gen 1 car (you will feel the difference) This is a PCM and a Super
chip
> combined. $130
>
> One LOS PCM with LPM module with 2 EPROMS. You can get one reprogrammed
from
> Ted while you continue to drive with the other. This is a PCM plus LPM.
Note
> the eproms are programmed for stage 2 cams and will need to be reflashed
to
> your exact application and modifications $200.
>
> One set of Hypertech underdrive pulleys-replaces lower pulley and
alternator
> pulley to reduce accessory drive losses and over spinning the alternator.
> $100
>
> One 20.8 mm front sway bar and new stock rubber bushings. This is the
perfect
> bar to eliminate the characteristic front end plow or push with the 24/26
> setup. Only use this bar with a non-quaifed MTX. I have used this setup
with
> Eibach springs and can say that the balance is excellent. The softer front
> bar will help keep the inside front wheel down on the pavement in the
tighter
> turns reducing exit wheel spin. $50.
>
> One pair of 3.0 L heads with FPS port work and FPS heavy duty valve
springs.
> There are no cams with these heads. They are very clean due to the use of
> synthetic oil. These heads are very nicely port matched to the intake and
> exhaust  manifold gaskets. I believe they were prepped by Shawn at IPT. I
was
> told that the valve guides and seals were replaced around 10K miles ago
when
> the heads were setup. These heads are not perfect. Cylinder #1 had a
> secondary throttle butterfly screw imbed in it. The screw has been removed
> and the ding was smoothed out. Several of the M7 X 1.0 cam bearing cap
> retaining bolts have stripped.  All have been carefully repaired with M8 X
> 1.0 heli coils and new bearing retaining cap bolts. The heads are not
warped
> and I would not anticipate any further durability issues with them. These
> would be very stout heads for a 3.2L MTX conversion or a stage 1 cam
upgrade.
> $200
>
> Dual remote oil filter setup with oil cooler. This includes remote dual
oil
> filter mount, oil filter adapter, oil cooler, and hoses. $200.
>
> Two 5 X 7 coaxial  JBL GTO series  package  tray speakers. These were used
> less than 3 months several years ago. Like new condition $35.
>
> Complete Cold air intake setup. This is a very nice setup that can be seen
on
> the SHO Club website from the last convention. Look for the bronze and tan
> engine. It consists of a throttle body to 3" tube rubber elbow, mandrel
bent
> 3" tube with 2 bends, a tube to MAF rubber adaptor, a ProM 77 mm MAF
> calibrated to the stock SHO settings, and a new large K&N style conical
> filter. On my car the hole through the inner fender was enlarged and the
MAF
> and air filter resided outside of the engine compartment and drew fresh
air
> only. $450. The MAF alone is worth more than this.
>
> Stock gear shift knob- like new condition. $35
>
> Four 91 stock slicers in average condition (not great) with 215-60 Dunlop
> Graspic HS2 snow tires mounted. 5 blank 91 centercaps included. Tires are
> worn more than 50%. These are winter tires and wheels to put on your
winter
> beater when things get bad. $200.
>
> Four 16 X 7 TSW EVO wheels with 225-50 Dunlop SP 8000s mounted. The wheels
> come with two different types center nuts (clear and blue annodized eight
in
> total). All the tires appear to have 6/32" of tread left which is about
> perfect for several track days. These are excellent street as well with a
> nice ride and low noise and excellent all round grip. They are very
> predictable. The wheels are in good to very good condition. I believe
there
> are 2 small rim nicks and two minor spoke scratches.  These are very sharp
> wheels.   $500.
>
> Four Earl's stainless steel braided brakelines (new) $60.
>
> One used 3.0L oil pump. This pump was switched out during a complete
bearing
> change and it made more pressure with the old bearings than the new one
does
> with the new bearings. Go figure. It should be in excellent condition.
>
> Used Accel foam air filter $15
>
> Colgan Bra-Good condition, used very little. $65
>
> Rotunda valve spring compressor tool (part number T89P-6565-A) $85
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes