[Shotimes] Help with LPM

[Bruce Malachuk]

I had (will know tonight) a similar issue with my LPM from Ted. I bought
mine used from Tim Dahm, but Tim assured me that it was workign perfectly
when he pulled it. I think it may have been some kind of programming glitch,
cuase I know Ted did have a problem with his PC that he did the tuning from.
I'm wondering if the eproms are actually getting the programming? I tested
it on another X2J car here locally in 5F weather, can it did the same thing.

Well I'm out to install mine right now.

Bruce
94 Opal Frost MTX
94 Deep Emerald Green ATX - w/90k gonna be parted
----- Original Message -----
From: "Ron Porter" <ronporter@prodigy.net>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Friday, March 21, 2003 5:46 PM
Subject: RE: [Shotimes] Help with LPM


> Hopefully someone can fulfill your request.
>
> However, FWIW from the old curmudgeon.....sell the LPM and 80mm MAF. Put
the
> stock 55mm MAF back on....with the Y-pipe and UDPs the car will run
better.
> No, don't go via "butt dyno", get on a Dynojet or do 1/4 mile runs.
>
> Opening the secondaries sooner is counterproductive. The idle works fine
> without resetting with the UDPs. If you really feel that you need to spend
> money on a MAF, go a calibrated Pro-M MAF and forget the LPM.
>
> Now, I am not against LPMs, but I feel that they have their value in
heavily
> modified cars (Supercharger, turbocharger, big NOS hit, etc), but are a
> waste for basic bolt-on cars....it's just one more thing to go wrong, and
> gives no appreciable performance gain.
>
> Ron Porter
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of SHOMail
> Sent: Friday, March 21, 2003 6:11 PM
> To: SHOtimes
> Subject: [Shotimes] Help with LPM
>
>
> I have a Ted B. LPM which does not work
> after proper installation (fan turns on and vehicle will
> not start).  He and I are attempting
> at this time to determine if it is the LPM or the
> computer.  I do not know anyone with a GEN2 MTX
> in my area so I am looking for help.
>
> Is there anyone with a GEN2 MTX and currently running
> an LPM that would be willing to plug this thing in
> and see if it works ?  Keep in mind I have some mods
> that he programmed in for me but the thing should still
> start the car.
>
> This is what I had it programmed for:
> X2J ECU, 80mm MAF, raised idle for UDPs, Y-Pipe,
> lower RPM for secondaries to open, 155lph fuel pump.
>
> I will send it to you with some $$ to send it back to me.
>
> Thanks,
> Chad L
> 92 Red MTX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes