[Shotimes] Moog Caster/Camber Kit # K8822 ?'s

[Dave Kegel]

I'm not sure what the Doug Lewis specs are.  How much front camber are you
running?

Up until a few weeks ago my spot welds were also intact.  When I installed
the adjustable rear control arms I drilled them out and went in for an
alignment.  I was at -2 degrees in the front with Eibachs/Tokicos, and a
little tweaking with the knuckle height on the strut.

-2 degrees is a lot for the street.  While we were only able to get it
to -1.5 (I did not hog out the tops of the strut tower), the car seems a bit
more stable under heavy straight line braking and acceleration.

Dave
----- Original Message -----
From: "James F. Ryan III" <av8r567@optonline.net>
To: "'Dave Kegel'" <d.kegel@attbi.com>
Sent: May 02, 2003 1:40 PM
Subject: RE: [Shotimes] Moog Caster/Camber Kit # K8822 ?'s


 My spot welds have never been cut/drilled, and my
alignment shop has never had a problem setting to the Doug Lewis specs for
lowered cars.  I have always gotten many, many miles out of my front tires
and they've always worn evenly.