[Shotimes] A/C question
Mike.Wojton@us.o-i.com
Mike.Wojton@us.o-i.com
Tue, 6 May 2003 09:53:27 -0400
Well, I've never charged a system myself, so I can't tell you the
procedure. That being said, if I wanted to just get it working and
not buy any more equipment, I would add a little, and see if it cools
adequately. If not, add a little more. You'd lower your chances of
damaging the system from overfilling that way.
Mike Wojton
Toledo, Ohio
-'95 Green MTX 3/01-1/03
ShoShop y-pipe
-'95 White MTX
'96 Brake Upgrade
Everybody is somebody else's weirdo.
"Mark Mucher" <mmucher@bellsouth.net> wrote on 05/06/2003 09:21:54 AM:
> Mike,
>
> I agree but where does one stop buying stuff?
>
> You get the gauges but until you get evacuation, recharge, leak
detection,
> etc. you'll still need to go to an A/C shop at some point...
>
> I'll bite the bullet but just wanted to see if there was a little
something
> I could do to put it off.
>
> The cans they sell at Wally World are devoid of instructions and the web
> sites talk of conversion but not topping up.
>
> Mark
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
> On Behalf Of Mike.Wojton@us.o-i.com
> Sent: Tuesday, May 06, 2003 9:13 AM
> To: shotimes@autox.team.net
>
> But you can't just do that. You might not need the whole can. I don't
> think the system will refuse more refrigerant when it is full on it's
own.
> You need gages to do it correctly. I'm about to buy a set, as my car
needs
> more too.
>
>
> Mike Wojton
> Toledo, Ohio
>
> -'95 Green MTX 3/01-1/03
> ShoShop y-pipe
>
> -'95 White MTX
> '96 Brake Upgrade
>
> Everybody is somebody else's weirdo.
>
>
>
> shotimes-admin@autox.team.net wrote on 05/06/2003 08:43:08 AM:
>
> > There is no correct procedure for topping off without guages.
> >
> > You'll know it's done when the can is empty.
> >
> > Steve
> > ----- Original Message -----
> > From: "Mark Mucher" <mmucher@bellsouth.net>
> > To: <shotimes@autox.team.net>
> > Sent: Tuesday, May 06, 2003 7:32 AM
> > Subject: [Shotimes] A/C question
> >
> >
> > > Can anyone tell me the correct procedure for topping up 134a with
> > > just
> a
> > can
> > > and a hose (no gauge)?
> > >
> > > How do I know when it's done?
> > >
> > > Thanks,
> > >
> > > mm in sunny FL