[Shotimes] Oil temp gauge
Paul Nimz
pmnimz@V8SHO.com
Wed, 14 May 2003 23:58:16 -0500
I'm getting ready to install a water temp sender in my ATX line just before
the cooler. With a repeat timer I will connect it to the dash coolant temp
gauge and have it cycle back and forth every 30 seconds between tranny and
coolant temps. This way I can monitor the tranny temp and the coolant temp.
At least that is the plan.....
Paul Nimz
'97 TR SHO
'93 EG mtx SHO
----- Original Message -----
From: "sho2go" <srfdude@cox.net>
To: <shotimes@autox.team.net>
Sent: Wednesday, May 14, 2003 4:01 PM
Subject: [Shotimes] Oil temp gauge
> Has anyone tried putting the temp sensor in the hole in the pan where the
> level sensor goes? I think that the temp readings at the pressure switch
area
> would not be as accurate as pan temps. Anyone?
> Mike
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes