[Shotimes] okay, the subwoofer is not working

[Jim and Debbie Leyden]

If you have an Ohm meter check the resistance of the sub.  It should be 6
Ohms.  If the resistance is good and the cone was blown you would hear a
buzzing sound from the speaker in the lower frequencies.  If the resistance
checks out and you hear nothing, there is some other problem.

Jim
just your basic mediocre armchair quarterback
right Ron?
but then I don't get all my answers from reading what someone else wrote.  I
learned from years of experience.


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of van Oss
Sent: Friday, May 30, 2003 1:36 PM
To: shotimes@autox.team.net
Subject: [Shotimes] okay, the subwoofer is not working


Okay, thanks to Al Fitzgerald Jr. I now have power to the subwoofer system.
However, the sub is not making any sound.  Do we just automatically conclude
that the subwoofer amp must be bad?  Or is there anything else to check?

Joseph van Oss
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes