[Shotimes] Heating Problem

Frank Costa fcosta@comcast.net
Sat, 8 Nov 2003 01:52:02 -0500


First thing i would try is check the heater hoses that connect to your
firewall in the engine bay. These hoses tend to come loose and blow
antifreeze into the heater core assembly. Thus having antifreeze burning on
top of the heater core.

If that doesnt help....

Your Heater Core Blew.....

Remove the dash and replace it.......about 8 hour job to replace a 20 dollar
part.

FWIW, ill never do mine again, ill get it done......your looking at like
3-600 dollars labor depending where you go.......Do yourself a favor and get
the most expensive heater core you can find.....i had to do mine twice, in 2
weeks....

Frank Costa and the "Silver Bullet"
89 Titanium Grey

MODS-
Koni Externally Adjustable Inserts
Eibach Lowering Springs
Updated Front Swaybar Endlinks
Polyurethane Rear Swaybar Endlinks
Solid Delrin Subframe Bushings
Directional Italian SLicers
Bridgestone HR40 Tires All Around
Subframe Connectors
Rod Shifter

http://www.brothersofmetal.org/frank.html


----- Original Message ----- 
From: "Shaun & Meggen Livermore" <smlivermore@wi.rr.com>
To: <shotimes@autox.team.net>
Sent: Friday, November 07, 2003 11:48 PM
Subject: [Shotimes] Heating Problem


> Something is defiantly wrong!  When you turn the blower on it blows a
> ton of smoke out of the vents that smells like coolant/antifreeze.  Had
> to open the windows and get out before I passed out.  It comes out a lot
> when the unit is on and a little bit when it is off.  I'm not sure where
> to begin with this one.  Help!  It's freezing here in WI.
>
>  Shaun Livermore
>  91+ 127K
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes