[Shotimes] (OT) 3.8L Head Gasket Info

[Kevin & Cheryl Airth]

Scot:
 Another problem to consider. The 3.8 head gasket leaking can put
anti-freeze in the crank case. If left to run through the bearings it will
cause much accelerated wear. Then you might more prone to spinning a rod
bearing. Check you oil. The only real way is to get the oil tested. All oil
analysis will check and report % glycol found.
.
.


> I'm thinking of punishing myself (and my knuckles) by replacing the head
> gaskets on a 3.8L Sable that we have.  I know I've seen a discussion
> recently about tips & tricks for re-installation.  Could someone point me
to
> some info, if it is on the internet, or e-mail me some info if you have
it.
>
> It appears coolant is leaking out the rear head seal and down the block.
Is
> this a common failure?  I've checked all of the hoses and the water pump.
> No coolant in the combustion chamber (yet).
>
> I think I'd take a 3.4L V8 w/ unwelded cams before I look at another
3.8L...
> It makes working on the SHO engine look like a walk in the park!
>
> Thanks in advance,
> Scot H