[Shotimes] Lug bolts

[Paul L Fisher]

I actually went to Napa and brought one of the old, non-sheared ones. Found a 
perfect fit. I'll post the part # when I get home.
-- 

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 177K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley 
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus 
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30 
oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm



Quoting Kevin & Cheryl Airth <clubairth@peoplepc.com>:

> Paul:
>  I found the aftermarket studs were shorter. I sheared several studs under
> the locking nuts myself. Don't know why either? Went back to the Ford part.
> Ford part #F6DZ-1107-AA  Package of 5. About $2 each list price.
> .
> .
> .
> 
> 
> 
> > Anything special on the lug bolts? Standard Taurus size? I was putting
> the
> > snows (Michelin Arctic Alpin) on and sheared off two lug bolts on the
> same
> > wheel.
> >
> >
> > Paul L Fisher
> > '93 Ford Taurus SHO Crimson Clearcoat ATX 177K Build date 11/18/1992
> 
> 


-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/