[Shotimes] shifter cable problems
Ron Porter
ronporter@prodigy.net
Tue, 25 Nov 2003 20:34:19 -0500
Actually, we seemed to find that full Plus cars started getting built in
April and were getting the rod shifter (Mallinson's Mocha is an April car,
IIRC).
Also, and I know I'll be corrected!, but weren't all of the full Plus cars
built from April forward (the ones with the Plus package described on the
window sticker) all rod shifter cars, but that there were a number of SHOs
built earlier that had various bits & pieces of the Plus package (like the
hood) that still had cable shifters?
Ron Porter
-----Original Message-----
From: Tim Dahm [mailto:timd@chartermi.net]
Sent: Tuesday, November 25, 2003 6:01 PM
To: Ron Porter; Dynon007@aol.com; shotimes@autox.team.net
Subject: Re: [Shotimes] shifter cable problems
Yea, sounds like he has a rod shifter. Not all plus models came with a rod
shift however- sometime in May '91 Ford switched over, plus's built before
then had a cable shifter. (ie my green 91+ and a black 91+ I parted last
spring)
Tim
----- Original Message -----
From: "Ron Porter" <ronporter@prodigy.net>
To: <Dynon007@aol.com>; <shotimes@autox.team.net>
Sent: Tuesday, November 25, 2003 4:24 PM
Subject: RE: [Shotimes] shifter cable problems
> I'll ask a dumb question, but are you sure that it's a cable and not a rod
> shifter? Reason I'm asking is that I was under the impression that all '91
> Plus models had rod shifters.
>
> Ron Porter
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of Dynon007@aol.com
> Sent: Tuesday, November 25, 2003 4:17 PM
> To: shotimes@autox.team.net
> Subject: [Shotimes] shifter cable problems
>
>
> I'm trying to fix my shift problem. Shifter moves but doesn't move car
into
> gear at all. I'm looking for these cables. I've take off the console,
> shifter
> knob, and boot and folded back the carpet near dash but I don't see these
> cables at all. There is a plastic piece of the right side of the floor pan
> that I
> guess is the heat duct. I just want to see what is the problem. The
chilton
> says I should be able to see the cables already. Do I need to take off
this
> plastic piece to see them?
>
> Kent 91+ White MTX 152K
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes