[Shotimes] Help! Please identify three "extra" bolts

[Midwest SHO Specialists]

Ed,

Off hand I beleive that the two 3/4 10mm bolts are the two that secure the
fuel lines to the rear valve cover.

~ Mike

Midwest SHO
www.midwestsho.com
Sales@Midwestsho.com
----- Original Message -----
From: "Edward Mazurek" <emazurek@cisco.com>
To: <shotimes@autox.team.net>
Sent: Saturday, October 11, 2003 3:30 PM
Subject: [Shotimes] Help! Please identify three "extra" bolts


> Hi..
>
> 95 MTX
>
> I just finished a complete maintenence on my 95 MTX. Here's
> what I did:
>
> - Valve lash
> - replace spark plugs
> - replace all hoses
> - replace all belts
> - crank position sensor
> - cam position sensor
> - replace water pump
> - replace crank seal
>
> And I have left over three bolts. They are all 6mm diameter,
> 10mm hex heads. Two are about 3/4" total length and the other's
> a little shorter about 5/8".
>
> Pics available upon request.
>
> Any help is appreciated!
>
> Thanks,
>
> Ed Mazurek
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes