[Shotimes] Gen 3 Subframe bushings in a Gen 1

[Dave Kegel]

You don't need to notch the subframe, you just need to grind off the
little nubs on the bushings.  They are plastic and come off easily.  It
will be obvious when you get the old bushings off and see what you're
dealing with.

I would make sure and use new bolts and anti-seize.  Not sure what
you're talking about as far as the nuts towards the front of the car.

Dave Kegel

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Ryan Staley
Sent: Monday, October 13, 2003 6:52 PM
To: 'SHOtimes'
Subject: [Shotimes] Gen 3 Subframe bushings in a Gen 1


Hey all, I'm going to finish what I need to do to my car this week. They
say on the website that I will have to put slight notches in the
subframe and I'm not sure how to interpret how large of notches they are
talking about or how hard that will be or even how to go about doing it.
Has anyone installed those before?  Also, I'm not quite sure where the
nuts for the bushings towards the front of the car are or the easiest
way to get to them.  Anyone want to offer any insight?

Thank you,
Ryan Staley
Pittsburgh, PA
91 SHO
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes