[Shotimes] Fw: Price Reduction on SHOnut Hybrid Ceramic Throwout bearings

[Mark Nunnally]

Last one in my 92 went 93k.  Current one has about 55k.  had some wear on it
when I had the tranny off last, but still works ok.

I've had one in the 89 on the old clutch for 45k now, fingers still look
pretty good.

mark



> So Outta curiosity do the TOB Rev.B work pretty good for a decent amount
> of time? Cuase my Opal Frost I hope got a new one when it got it's last
> dealer installed clutch at 62k, and I'm at 90k now. I'll eventually be
> putting one of Josh's ceramic ones in to that car when I go with a HD PP
> and grabbier clutch.
>
> Bruce Malachuk
>
> 94 Opal Frost MTX
> 93 Black ATX soon to be parts
> 93 Green MTX - black interior...a turd with wheels right now
>
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net] On Behalf Of Tim Dahm
> Sent: Wednesday, September 03, 2003 9:20 PM
> To: shotimes@autox.team.net
> Subject: [Shotimes] Fw: Price Reduction on SHOnut Hybrid Ceramic
> Throwout bearings
>
>
> ----- Original Message -----
> From: "John Holowczak" <jeh4@worldnet.att.net>
> To: <TechSHO@topica.com>
> Sent: Wednesday, September 03, 2003 8:09 PM
> Subject: Price Reduction on SHOnut Hybrid Ceramic Throwout bearings
>
>
> > Noticed Josh lowered SHOnutPerformance.com's price on ceramic hybrid
> > clutch release bearings from $105 to $95.
> >
> > There is a growing body of evidence that these work to prevent clutch
> > finger wear, with 2 pressure plates coming back from the feild due to
> > 3.2 upgrades etc. and showing little finger wear with 30 to 32 K miles
>
> > (Mark Mallory's car, and someone else from upstate NY).  Statistics
> and
> > an article in SHOclub are hopefully forthcoming.  Also, John Hrinsin
> and
> > Bizzy(SHOforum) pulled their transmissions for Quaife install, rebuild
>
> > etc. and saw basically no finger wear in the 10 K mile range.
> >
> > I can remember during the late 90's on SHOtimes clutches would be
> > pulled
> > due to inability to release (clutch finger wear preventing full
> release)
> > with as little as 20 or 25 K miles.
> >
> > Speaking of which, can someone forward this message over to SHOtimes?
>
> > I
> > am no longer on both lists (TechSHO and occasional SHOforum are
> > enough!).
> >
> > Thanks,
> >
> > J Holowczak
> >
> > --^----------------------------------------------------------------
> > This email was sent to: timd@chartermi.net
> >
> > EASY UNSUBSCRIBE click here:
> > http://topica.com/u/?b1dhxA.b3jnKs.dGltZEBj
> > Or send an email to: TechSHO-unsubscribe@topica.com
> >
> > TOPICA - Start your own email discussion group. FREE!
> > http://www.topica.com/partner/tag02/create/index2.html
> > --^----------------------------------------------------------------
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes