[Shotimes] Plug wear and IAB

[Robert Bruce]

White deposits are usually caused by combustion chamber temps getting too
high.  Cause is usually low octane fuel, improper timing, cooling problems,
leaking head gasket or air/fuel mixture too lean.

Noticing any engine knock or loss of power?

A sticking IAB would cause off idle drivability issues,  but not necessarily
a lean condition.

Robert Bruce
93 atx


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On Behalf Of Patty Doyle
Sent: Thursday, September 11, 2003 1:19 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Plug wear and IAB


quick refresher question:    Does  heavy WHITE deposits on electrodes
denotes dirty/sticking IAB?????????
Plugs are Motorcraft AGS32PP,,,,,,possible age 55K......

Patty


1990  White S H O:  Snowwind:316K..very stock, very OEM1991  Black S H O:
Bart:202K, very modded, many non-OEM

---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes