[Shotimes] Removing the front ABS sensor

[Carl Prochilo]

When I did this last a few years ago, there wasn't much choice in
the matter.  The wall of the orifice had oxidized so the new sensor
wouldn't fit unless the opening was cleaned and enlarged slightly.

Eventually I had the 96 brake upgrade done, and the sensors were
able to be reused.
-- 
Cheers,
Carl Prochilo
1992 Ultra Red Crimson

John J. Weidenbenner said:
> I'll do that on the new install.
>
> John W.
> ----- Original Message -----
> From: "van Oss" <vanOss@centurytel.net>
> To: "John J. Weidenbenner" <johnjweid@charter.net>;
> <Shotimes@autox.team.net>
> Sent: Thursday, April 01, 2004 12:36 PM
> Subject: Re: [Shotimes] Removing the front ABS sensor
>
>
>> It's no help to you now, but I've learned to dremel out the
>> opening a bit
>> before installing the new sensor.  Makes it much easier to get the
>> new
>> sensor out NEXT time.
>>
>> VO
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes