[Shotimes] Removing the front ABS sensor

[Mike.Wojton@us.o-i.com]

Coincidentally, upon going through my father-in-law's basement
whilst moving him, I came across about a dozen cans of this stuff.
All still full.  They came home to my house.  : )


Mike Wojton
Toledo, Ohio

-'95 White MTX
   '96 Brake Upgrade

"Avoid the clap." - Jimmy Dugan







shotimes-admin@autox.team.net wrote on 04/02/2004 10:30:46 AM:

> This is my all-time favorite. Much better than anything else I have 
found!!
> Expensive and in a orange can. Hard to find in some places.
> .
> .
> 
> 
> 
> > How about KROIL?
> >
> > http://www.kanolabs.com/
> >
> >
> >
> >
> >
> > Frank Costa and the "Silver Bullet"
> > 89 Titanium Grey
> >
> > MODS-
> > Koni Externally Adjustable Inserts
> > Eibach Lowering Springs
> > Updated Front Swaybar Endlinks
> > Polyurethane Rear Swaybar Endlinks
> > Solid Delrin Subframe Bushings
> > Directional Italian SLicers
> > Bridgestone HR40 Tires All Around
> > Subframe Connectors
> > Rod Shifter
> >
> > http://www.brothersofmetal.org/frank.html
> >
> >
> > ----- Original Message ----- 
> > From: "Paul Nimz" <pnimz@v8sho.com>
> > To: "`V6 SHOtimes" <SHOtimes@autox.team.net>
> > Sent: Thursday, April 01, 2004 10:58 PM
> > Subject: Re: [Shotimes] Removing the front ABS sensor
> >
> >
> > > Where I use to work they used a naphtha type solvent to wipe off the 
top
> > of
> > > the batteries during assembly.  For some reason after using this for 
40
> > > years they decided it was a hazardous solvent, benzene I think.  Any 
way
> > > they went to WD 40.  Bought 55 gallon drums of it at around $600 a
> barrel.
> > > Worked good as a solvent.
> > >
> > > They were suppose to keep it agitated as the WD 40 component would
> settle
> > > out.  They never did and usually threw away the last 5 galloons or 
so.
> > This
> > > was a white milky liquid.  Still got 5 gallons or so around..... 
Anyway
> > it
> > > is also a good cleaner/solvent.
> > >
> > > Paul Nimz
> > > '97 TR
> > > '93 EG mtx
> > >
> > >
> > > ----- Original Message ----- 
> > > From: "bjshov8" <bjshov8@comcast.net>
> > > To: <Shotimes@autox.team.net>
> > > Sent: Thursday, April 01, 2004 9:07 PM
> > > Subject: Re: [Shotimes] Removing the front ABS sensor
> > >
> > >
> > > > WD-40 is only good for one thing, and that is WD, what it was 
designed
> > > for.
> > > > That means Water Displacement.  It is not very good at 
penetrating,
> > > > lubricating, or protecting.  It works a little bit so people don't
> > realize
> > > > that it is so bad.
> > > >
> > > > The people that make that stuff are real good at promoting their
> > product.
> > > > It is sold everywhere and has come to stand for all the things 
that we
> > > THINK
> > > > it does in the minds of probably the majority of consumers.
> > > >
> > > >
> > > >
> > > > > That was your problem. WD-40 sucks as a rust penetrant. PB
> > > > > Blaster is the good stuff.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes