[Shotimes] Still stalling - Cleaned IAB

[Paul L Fisher]

There is a new version of the IAB that came out in '96. Look on SHOtimes for
the part #.


Paul L Fisher

'99 Ford Taurus SHO Toreador Red Clearcoat Metallic 64K - Kirk'ed 2/29/04
 
SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Michael Piplani
Sent: Sunday, April 25, 2004 3:28 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Still stalling - Cleaned IAB

I followed the directions on the FAQ for cleaning the IAB.  Got it off with
no
problems, but I did note that the ISC would not come off the IAB.  It is
'crimped' onto the IAB.  There was some fouling and I emptied a can of carb
and choke cleaner into the IAB, got lots of stuff out.  I couldn't move the
piston though.

The car started and it was idling for about 5 minutes (yah! :)    There a
new
'rushing' noise and then she stalled.  Couldn't get her to idle after that.
Took a hard drive up and down the local highway.  Still wouldn't idle.
Disconnected the ISC, still wouldn't idle.

Any thoughts out there?  I'm concerned 'cause my IAB/ISC combo won't come
apart like described in the FAQ and pictured in my Chiltons.

Bruce Malachuk I'll trade you for a house call.

Mike Piplani
'94 ATX
Delmar NY
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes