[Shotimes] ATX Hard 1-2 shift

[Kirk Doucette]

Does it have axels to support the BANGING?  How about the support shaft
bearing? Replaces the Pass Side Axel seal with a roller bearing to support
the axel.. If your banging gears you need one of these.

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Kevin & Cheryl Airth
Sent: Thursday, April 29, 2004 12:31 PM
To: Anthony Clerkin; shotimes@autox.team.net
Subject: [Shotimes] ATX Hard 1-2 shift

Yes. My FPS built ATX has the shift kit plus more and has a very hard 1-2
shift!
.
.



> Could the ATX have a shift kit?  My fps ATX shifts so hard into second
> that the tires break loose.

>
> The hard 1-2 shift is pretty normal for this automatic. I am surprised
> that
> it has a rebuilt engine at such a low mileage? The transmission is much
> more
> trouble prone? Any history on the tranny?What does the fluid look like
> in
> the tranny? >
>
>
> > Greetings all,
> >
> >       Well I decided against the supercoupe and my car to totally fix
> it
> is
> > gonna cost at the least $5k.  But the good news is i found a 95 red
> atx
> sho
> > for $4k with 77k on the car and about 3k on a newly rebuilt engine.
> The
> car is
> > really nice....its feels like a new sho but I have 2 problems with it
> I
> dont
> > like.  The 1st one is when the car is cold it will shift really hard
> from
> 1st
> > to 2nd gear but only does it when its cold.  ?
> >
> >
> > Thank you in advance...
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes