[Shotimes] moonroof switch

[Kevin & Cheryl Airth]

Joe:
I use JB weld if the switch is just loose. Plastic is always tough to glue,
so make sure and roughen the surface with sandpaper before gluing. DO NOT
buy the Ford switch!!! NAPA makes a much better switch and with the
instructions from a fellow SHO owner I would recommend replacing the switch.
It's NAPA #735-4539. Only about $12. It takes some slight modification but
the switch is black and has a nice quality click to it when you use it!
 If you need the instructions let me know and I will send them to you. I
don't know who figured this out but the print out I have is labeled
"SHOckforce"?
.
.



> The plastic on the switch itself in my was broken (did this twice), had to
> replace the switch....about $50 at Ford.
>
>
> > In my wife's 95, the moonroof switch has detached from the console.
> What's
> > the adhesive of choice for refastening this switch?  JB Weld or
something
> > else?
> >
> > VO