[Shotimes] Cam seal

[Chris "Zap"]

Rich,

    I had very good luck using a PVC pipe coupler, and if I recall, it was
for 1.25" pipe, or a piece of 1.5" PVC would work as well.  However, I did
have a little bit of trouble, and I think the factory tool might be slightly
simpler if available.  There are some good instructions at
http://www.shophoenixproject.com for the change.

-Chris
----- Original Message ----- 
From: "R and S" <rsdesi@jps.net>
To: <shotimes@autox.team.net>
Sent: Wednesday, August 18, 2004 12:15 AM
Subject: [Shotimes] Cam seal


> I need to change my cam seal as it is leaking badly.  Do I really need
> the special tool listed in the shop manual, or do you guys have some
> make-shift ideas for common tools I can use?  Thanks..
>
> Rich
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes