[Shotimes] CAM bearings and/or CAMs

Kevin & Cheryl Airth clubairth@peoplepc.com
Wed, 18 Aug 2004 10:57:26 -0500


John:
 Remove the pan and just unbolt the rod caps.  But you will probably be able
to tell which one spun just by wiggling the rod cap without unbolting it. It
will be REAL obvious compared to the other rods. The only other problem
might be frozen bolts on the Y-pipe if it's not been removed before. They
tend to get stuck!
.
.



> Thanks for the tip.   How do one check for a spun rod
> bearing??
>
> thanks again, all.
>
> -John