[Shotimes] tie rods and rotors

[Dave Kegel]

No, unfortunately they're not stamped.

Dave

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Ron Porter
Sent: Wednesday, December 01, 2004 8:06 PM
To: 'Dave Kegel'; shotimes@autox.team.net
Subject: RE: [Shotimes] tie rods and rotors


I suppose it probably isn't as simple as on the stock rotors, where the
minimum thickness is stamped right on the inside of the rotor!!

Ron Porter