[Shotimes] Re: reprogramming a remote fob
Mike.Wojton@us.o-i.com
Mike.Wojton@us.o-i.com
Thu, 22 Jan 2004 13:13:30 -0500
You'll probably find it in the trunk. That's where mine was. Follow the
procedure on the faq. It worked for me. I think it was behind the liner
on the drivers side of the trunk.
As an interesting aside, when I bought this car, the remote didn't work.
I replaced the battery; still nothing. Tried reprogramming; nothing. I
found the remote from my old green car, reprogrammed it, and it works.
I still have the other one somewhere.
Mike Wojton
Toledo, Ohio
-'95 White MTX
'96 Brake Upgrade
"Avoid the clap." - Jimmy Dugan
shotimes-admin@autox.team.net wrote on 01/22/2004 12:38:05 PM:
> Okay, I dug around in the spare-tire well and found the module and code.
> Thanks, Kevin.
>
> Now I'd like some help from anyone who has reprogrammed a keyless module
to
> work with a new fob. (I have a 92 shop, 93 shop, and 92 EVTM, and they
> leave me with one question about REMOTE keyless.)
>
> The 93 shop manual talks about a two-wire "J4" connector that I would
access
> by dropping the glove box. I'm supposed to short across this connector
> momentarily, then press any button on the fob, and voila, the car now
> recognizes that fob. Is that the procedure?
>
> I've got the glove box lowered. Nothing jumps out at me as being the J4
> connector, a.k.a. Programming Connector. Any tips?
>
> VO
>
> ----- Original Message -----
> Joe:
> There should be a sticker on the module in the trunk on the drivers
side.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes