[Shotimes] removing crankshaft sprocket
cmichaelo@optonline.net
cmichaelo@optonline.net
Tue, 20 Jul 2004 22:02:20 -0400
Man you're a genious...thanks
Michael
94MTX,green,BOS+
----- Original Message -----
From: Kenneth Epperly <epperly1@optonline.net>
Date: Tuesday, July 20, 2004 8:36 pm
Subject: Re: [Shotimes] removing crankshaft sprocket
> The long bolts that hold the plastic covers over the timing belt.
>
> Ken
> ----- Original Message -----
> From: <cmichaelo@optonline.net>
> To: "shotimes" <shotimes@autox.team.net>
> Sent: Tuesday, July 20, 2004 8:24 PM
> Subject: [Shotimes] removing crankshaft sprocket
>
>
> > What size bolts are needed to remove the crankshaft sprocket? I
> tried1/4"-20, which is needed for removing the harmonic balancer,
> but it's too
> big for the sprocket? Any other suggestions for removing the sprocket?
> >
> > Michael
> > 94MTX,green,BOS+
> >
> > [demime 0.99d.1 removed an attachment of type text/x-vcard which
> had a
> name of cmichaelo.vcf; charset=windows-1252]
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
[demime 0.99d.1 removed an attachment of type text/x-vcard which had a name of cmichaelo.vcf; charset=windows-1252]