[Shotimes] Removing baked plugged wires

Rick Glass rick@pitroadproducts.com
Tue, 1 Jun 2004 23:05:05 -0500


I bought a tool at AutoZone, designed for pulling the boot on the
wires....worked great....

Rick Glass
   Nashville, TN
   SESHOC
'99 Silver 49k (these freakin' things add up fast)
   Flowmaster 40's
   no "pre-muff"/no resonator
   still not Kirk'd
----- Original Message ----- 
From: "John Semchena" <jhsem@umcc.ais.org>
To: "SHOtimes" <Shotimes@autox.team.net>
Sent: Saturday, May 29, 2004 9:09 PM
Subject: [Shotimes] Removing baked plugged wires


> Any suggestions on removing spark plug wires that have vulcanized and
> are stuck to the plugs?  Cylinder one's wire came apart at the boot from
> pulling on it, and the part that runs down to and connects with the plug
> is brittle.
>
> The least destructive the method the better, as if I can get the old wires
> out in decent shape I stand a chance to have them replaced for free under
> warranty.
>
> Stupid stuck thermostat overheating my engine...
>
> TIA.
>
> John.
> 94 rare green ATX
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes