[Shotimes] Re-enforced Motor Mounts

[Bruce Malachuk]

Kirk Doucette sells some Kickass mounts, I have all 3 in my car, only thing
that is a pain is waiting for him to have the time and good cores to make
them, His are priced right, and are very very stiff, but wil give a little
to have no noticable vibrations. Josh T. of SHOnut has 2 types of mounts,
and from my experience the extreme ones are almost to stiff. They are a
little harder to install because of the stiffness.

I've got some old ripped mounts here that I was going to play around with
over the summer, pourable urethane, welder, and some spare time and see if I
can come up with a durable reinforced mount. I was looking at an 85A
durometer (cured) urethane and or a 97A one as well. That coupled with a bit
of steel should result in a stronger mount, and could even possibly use old
ripped mounts as long as the mounting holes and hardware are good. 


Bruce J Malachuk

*	94 Opal Frost MTX 
*	93 Emerald Green MTX 
*	93 Black ATX - parts 
*	95 Silver Frost ATX SE - SLO 


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of alfitz@alfitz.com
Sent: Tuesday, June 08, 2004 12:45 PM
To: _ShoTimes
Subject: [Shotimes] Re-enforced Motor Mounts

Who sells the best re-enforced motor mounts for the SHO (MTX)?


Al Fitz
alfitz@alfitz.com

GET YOUR YAMAHA-SHO EMBLEMS AT:
http://www.alfitz.com/sho/yamaha-emblems.htm

****************************************************************************
PLEASE INCLUDE A COPY OF THIS EMAIL IN YOUR REPLY
**************************************************************************
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes