[Shotimes] Re: Aftermarket fan/motor for ATX?

[Kevin & Cheryl Airth]

Mark:
 I have Perma-Cool P/N 19008 for the ATX. Jegs has it for $83.00. Not a lot
cheaper than what you found. This is a 12" fan with plastic blades. It will
take some small modifications to install and a change of electrical plugs.
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1114&prmenbr=361
.
.



> OK folks, y'all gotta stop posting what's gone wrong with your SHO.  The
week
> after you post it, the same thing happens to mine.  Now what about those
fan
> motors!!  My 94 ATX is starting to whine when the fans go on.  And, it's
> getting louder and the temp needle's up a bit.  We're having springlike
weather all
> week and with the return of warm weather I fear a replacement is imminent.
>
> It has the big-n-little 2 fan style.  The entire factory piece is $400 and
> RockAuto has AC Delco replacement motors, $110 (EACH).  Yipes.
>
> There were a couple posts about aftermarket fans.  Those posts were about
an
> MTX with a big single fan as I recall.  Anyone know if an ATX aftermarket
> solution exists?
>
> One thing at least, it looks pretty easy to lift the fan/shroud assembly
out
> for replacement or refitting.  Guess I better start looking for a friendly
> motor rewinder too...
>
> Cheers,
> Mark LaBarre
> 94 ATX 125k