[Shotimes] Re: 60,000 mile check THICKER shims

[Anthony Clerkin]

DS
Dumb Shit

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Paul L Fisher
Sent: Friday, March 19, 2004 9:09 AM
To: 'Fred George'
Cc: 'Tech SHO List'; 'SHOtimes'
Subject: RE: [Shotimes] Re: 60,000 mile check THICKER shims

Delta Sierra? What's that?

26 mm? That's over around an inch!


Paul L Fisher

1999 Ford Taurus SHO TR 63K - Stock. Kirk'ed.
1993 Ford Taurus SHO ATX 183K with some stuff. For sale soon.

See information about my '93! http://www.paul-fisher.com/SHO

Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
On Behalf Of Fred George
Sent: Friday, March 19, 2004 8:54 AM
To: sales@shonutperformance.com
Cc: Tech SHO List; SHOtimes
Subject: [Shotimes] Re: 60,000 mile check THICKER shims

Help!

Apologies to all, if the below issue results from a genuine Delta Sierra

move on our parts.

We're in the middle of the second 60,000 mile check and some of the 
shims, even the original 2650s on the exhaust valve tappets, apparently 
are too thin to close the gap down to .010 to .014. I assume all the 
measurements are taken when the engine is cold and the cam lobe is 1800 
away from the tappet.

Yes, all the cam lobes on all four cams are in good shape, so cam wear 
isn't the cause of the excessive gap.

Joshua:  None of the shims in the kit is thicker than 2625 (26.25 mm). 
So I really need some shims in the 2675 to 2700 range, unless we're 
doing something terribly wrong during the measuring process.


Fred
619.275.0222
'89 Gen 1 original owner since new
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes