[Shotimes] Differences between 3.0 & 3.2 engine harness?

[Alan Fanning]

Hold everything - if the harness is connected to a MTX ECU, any extra wires
are just going along for the ride aren't they?

    Alan

> 
>> Could a harness from a 3.2L ATX be used with a
>> 3.0L engine and ECU? Anyone with a good schematic of both systems? Or are
>> the two way different?
> 
> I would "suspect" that the ATX harness would run the engine, but if it had a
> CE
> light included, the light would be on, due to the absent transmission.  I am
> certainly not a wiring harness expert.
> 
> Good luck with your attempt!!
> 
> George