[Shotimes] Hazards Do Not Work

[Rick Glass]

I doubt if the problem is the MFS if the turn signals work but the hazzard
light do not.
It could be a fuse, but my guess would be the hazzard switch isn't making
good contact.

Rick Glass
   Nashville, TN
   SESHOC
'99 Silver 48k (these freakin' things add up fast)
   Flowmaster 40's
   no "pre-muff"/no resonator
   still not Kirk'd
----- Original Message ----- 
From: "van Oss" <vanOss@centurytel.net>
To: "Ken Johnson" <kdjsho@comcast.net>; <shotimes@autox.team.net>
Sent: Wednesday, May 19, 2004 9:51 PM
Subject: Re: [Shotimes] Hazards Do Not Work


> My first thought would be crud in the MFS (multi-function switch)
preventing
> electrical contact.  The MFS is the stalk on the left side of the steering
> column.  I would remove it, open it, and clean it.  If you'd like
> instructions on how to do that, let us know.
>
> VO
>
>
> ----- Original Message -----
> My '95 failed inspection for the first time ever.  Hazards do not work.
Both
> blinkers are fine.  Hazard button seems a bit sticky as well.  Anyone ever
> had
> this problem before?  Not even real sure how to get into that area.
> Ken
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes