[Shotimes] RE: GM rear arm hardware

[Ian Fisher]

8 sleeves, and either 8 or 10 washers. I reused 4 that
were on the car and the 4 tiny ones that came with the
TCE spindle braces. If I had my druthers I would have
used the OEM ones instead of the TCE but time wasn't
on my side so I couldn't go out looking for more.

I used OEM (new and used) on either side of the
bushing at the H brace and OEM on the outside of the
bushings at the spindle. The inside facing bushings
(facing the spindle) for the TCE ones.

Ian

--- Kirk  Doucette <Kirk.doucette@verizon.net> wrote:
> I think its 8 washers and 8 sleeves.. could be 16
> washers  I forget
> 
> Kirk J Doucette
> NESHOC President
> Stormtrooper-97 White
> 
> -----Original Message-----
> From: Paul Nimz [mailto:pnimz@v8sho.com]
> Sent: Monday, May 24, 2004 2:41 PM
> To: `V8 sho@v8sho.com; `V6 SHOtimes
> Subject: GM rear arm hardware
> 
> What all is included in the SHOnut kit?  I have the
> kit but want to be sure
> I have all the pieces around.
> 
> Thanks
> 
> Paul Nimz
> '97 TR
> '93 EG mtx
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes



	
		
__________________________________
Do you Yahoo!?
Friends.  Fun.  Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/