[Shotimes] Brass radiator question

[Paul Nimz]

I had a replacement Modine that leaked almost from the beginning, especially
when cold.  I replaced it and tried recrimping.  it seemed the drivers side
took more of a crimp that he passenger side.  As a precaution I crimped the
new one I replaced it with before putting it in.  It too took a good amount
of re-crimping.  No leaks at all out of that one.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "George Fourchy" <krazgeo@comcast.net>
To: <shotimes@autox.team.net>
Sent: Thursday, May 27, 2004 9:15 PM
Subject: Re: [Shotimes] Brass radiator question


> On Thu, 27 May 2004 17:14:30 -0400, Leigh Smith wrote:
>
> >I am concerned about the corrosion potential.
>
> Use a standard replacement from 1-800-radiator (they all have lifetime
> warranties...you'll only buy one) or any other dependable source, keep a
clean mix
> of 50/50 antifreeze (green) and water filled to the top, and you'll have
no
> problems.
>
> George
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes