[Shotimes] water pump o-ring

[Robert Bruce]

The water pump o-ring is a JASO standard (Japanese Automotive Standard).
It's size is 1.9mm x 35.2mm ID.  The water crossover tube requires two
o-rings which are also a JASO size.  These are 3.5mm x 40.2mm ID.  Both
o-rings are the same on the atx and mtx.

Robert Bruce
93 atx
92


-----Original Message-----
From: Kevin & Cheryl Airth [mailto:clubairth@peoplepc.com]
Sent: Friday, November 05, 2004 11:54 AM
To: Robert Bruce; Shotimes
Subject: Re: [Shotimes] water pump o-ring


Robert:
 If you get the standard O-ring size please post it. I only have the stock
part numbers.

Fat O-ring: Goes on water transfer tube #E9DZ-8563-A. List about $10
Skinny O-ring: Goes on water pump to block #E9DZ-8513-B. List about $6

 These both come 2 to a package from Ford.
.
.



> I need to replace the o-ring that seals the water pump to the block.  What
> is the correct size or dimensions for that o-ring?
>
> Robert Bruce
> 93 atx