[Shotimes] 22mm Fronnt Sway bar

[Ron Porter]

In a spreadsheet that Leigh Smith posted awhile back, the rear bars from
'92-'94 or so were 23mm (as opposed to 26mm in the '89-'90). I know that
'93s and early '94s (like my '94) had 24/23 bars, and then ,disagreeing with
Leigh's s/s, the '95s had wimpy bars F&R (somewhere in the 19-21 range for
both), as I pulled a set off the POS '95 I had to put in the 24/26 combo.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Carl Prochilo
Sent: Monday, November 08, 2004 7:46 AM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] 22mm Fronnt Sway bar


I want to say that it is 23mm.  In other words, when the Gen2 was
introduced, one of it's attributes was a more rigid body design.  As a
result, there was less need to stiffen the rear end, so to keep the car
understeering, Ford made the rear bar smaller.  I do know that the front
bar measured at about 24.6mm.
-- 
Cheers,
Carl Prochilo
92 Ultra Red Crimson

On Sun, November 7, 2004 3:29 pm, Alan Fanning said:
> What diameter?
>
>>
>> I have an original rear bar for a 92 in my garage.  For some reason I
>> don't
>> think this part is in demand, but if anyone wants it, please let me
>> know.
>> Having the extra part is due to buying a 26mm bar as an upgrade.
>> --
>> Cheers,
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes