[Shotimes] Lamp Out Module with Aftermarket Headlight Harness Mod

[Kevin & Cheryl Airth]

This is from a guy named Dick Carlson in 1999. I am surprised the web pages
are still valid!
Here is the circuit diagram:
http://www.fortunecity.com/silverstone/jensen/6/diag.htm

Here is a picture of way he did it.
http://www.fortunecity.com/silverstone/jensen/6/harness.htm

I have done this mod and it works good.

 If I did this again I would just build my own harness. Much cheaper and you
could use better relays and wire. This site has a good set of instructions
for building your own harness and other lighting mods people do. Good
discussion on picking relays and wire sizes. I think this should have been
stock from Ford. You NEED full voltage at the headlamps!
http://www.danielsternlighting.com/tech/tech.html
.
.
.



> I'd like it
> thanks
> Ian
>
> --- Kevin & Cheryl Airth <clubairth@peoplepc.com>
> wrote:
>
> > Bob:
> >  There is a wiring mode you can do which will keep
> > the Light out monitor
> > working for everything except the headlamps. You
> > should be able to see if
> > those are still working! Let me know if you want it
> > and I will post it. It's
> > a pretty simple mod.
> > .
> > .
> > .
> >
> > > This upgrade does light the "light out" light. I
> > have a black interior so
> > I
> > > took a triangle shaped piece of rubber roofing [no
> > reason, had it lying
> > > around]  and stuck it to the corner of the dash
> > with double side tape.
> > Can't see the
> > >  light and the rubber piece is inconspicuous.
> > >
> > > Bob 93 MTX