[Shotimes] Problem Pinpointed

[Paul Nimz]

If it was me I would just use an external lighting relay.  Cheap and easy 
with no compatibility issues.  You can get the small board mount ones from 
electronics stores but they cost more and shipping is involved.  A used CCRM 
is a gamble but would be my second course of action.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "M Khan" <jkhan302@yahoo.com>
To: "shotimes" <shotimes@autox.team.net>
Sent: Friday, November 19, 2004 9:17 AM
Subject: [Shotimes] Problem Pinpointed


> Well, after much diagnostic work, I have pinpointed
> the cause of the stalling on the 93 ATX.
>
> For some reason, the fuel pump relay in the CCRM is
> cutting out.  After it goes out, it starts working
> shortly after, 2-3 mins.  This makes me beleive that
> there is some sort of heating problem in the relay.
>
> Now, for the repair....  Options
>
> 1. new CCRM
> 2. open the CCRM and repair the relay
> 3. wire a new relay for the fuel pump externally
> (through CCRM wiring)
>
> If the relay is external, will it interfere with the
> function of the CCRM?
>
> From looking at the wiring diagrams, I think it will
> work, just want to get the experts' opinions on what
> the best course of action is....
>
> Thanks,
> Mike
> 95 MTX
>
>
>
> __________________________________
> Do you Yahoo!?
> The all-new My Yahoo! - Get yours free!
> http://my.yahoo.com
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes