[Shotimes] L0S PCM?

[Ron Porter]

Can the twEECer board correct a bad circuit that runs the secondaries? This
PCM doesn't feed the 12v to the green wire at idle, it sits at about .7-.8v
all the time, not only after 4K like it's supposed to.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Mark Nunnally
Sent: Thursday, October 07, 2004 11:07 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] L0S PCM?


91

with the twEECer board, you can run the X2J program on any year computer :)

mark

----- Original Message ----- 
From: "Ron Porter" <ronporter@prodigy.net>
To: "Shotimes" <shotimes@autox.team.net>
Sent: Thursday, October 07, 2004 11:03 PM
Subject: [Shotimes] L0S PCM?


> Anyone know what year MTX had the L0S PCM? I know it wasn't '89 (B9, or
> something like that), and not the later Gen 2s with the X2J.
>
> FWIW, I had bought a spare X2J from Justin Shick in the chance that was
the
> problem with my inop secondaries. Well, turns out that was it. The car is
> now back to it's ass-kickin' BOS-equipped self.
>
> Anyway, I got a surprise when I wrestled out what I thought was the
original
> X2J. Turned out to be a reman L0S. Original owner was doing the "dyno-tune
> via USPS" with Vadim when he installed the BOS back in the '90s, so I
> suspect this got swapped somewhere along the line.
>
> Ron Porter
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes