[Shotimes] I hope my Throw-out don't go out!
Ron Porter
ronporter@prodigy.net
Wed, 1 Sep 2004 12:24:36 -0400
AFAIK, Josh doesn't sell the stock clutch setup anymore, and it's not shown
on his website. He does have his own HD clutch setup for around $375,
depending on how you order it.
The best everyday price for a stock Ford clutch is $255 from Performance
Plus (pressure plate & disc). A similar clutch is the Rally Series from
South Bend Clutch for $325. South Bend also has two more aggressive clutches
for the SHO. The TZ for $430, and the DXD for $465.
The ceramic (@ $155) is nice, but I bought the TOB Rev B design from Advance
Auto that Josh uses as the basis for the ceramic bearing. It is $16!!
(thanks for that tip from Mark!!).
I have had stock Ford clutches, and the SHO Shop HiRevs Jr, over the years,
and have had good luck with the Ford clutch.
Ron Porter
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of shewitt@hypercon.net
Sent: Wednesday, September 01, 2004 11:39 AM
To: Bobbonnit1@aol.com; SHOTIMES@autox.team.net
Subject: Re: [Shotimes] I hope my Throw-out don't go out!
I would contact Josh at www.SHOnutperformance.com and get
the stock pp/clutch and get the ceramic throw out bearing.
If spend a lot of time at track events, then you may want
to invest in a better clutch/pp.
I would plan on buying the parts soon, but the throwout
bearing has been known to make noise for a long time
before the clutch fails. You may get another few months
out of it...
Scot H
95 Red MTX
On Wed, 1 Sep 2004 11:05:32 EDT
Bobbonnit1@aol.com wrote:
>The throw-out bearing is making a dry sound on my '89
> when I'm sitting at a
>stop and I have my foot resting on the clutch pedal.
>Does anyone know just
>how long I have before I must replace it? Since the
>throw-out bearing is about
>to fail and I'll have to tear it down, which brand of
>pressure plate and
>disk would give me the best bang for the buck? I'll be
>replacing my rod and main
>bearings while I'm at it and would appreciate any time
>saving ideas, plus
>the best parts house to buy then from....
>
>
>Robert K. '89 OEM white,silver