[Shotimes] Pro-m 77 on an ATX?

[Dave Kegel]

What makes you think they are dissimilar?  As far as I know, the
transfer functions are the same between all the computers.  And the 55mm
MAFs are all the same as well.  

Dave Kegel

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Adam Parrott
Sent: Saturday, September 11, 2004 1:21 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] Pro-m 77 on an ATX?


Ian,

Since the ATX and MTX transfer functions are quite dissimiliar, I highly
doubt that your MTX-calibrated Pro-M 77 will work correctly on any ATX
car without reprogramming.  To be sure, I would first test the MAF on a
stock ATX car and see how it responds (both at idle and during a test
drive).  My guess is that the car will both idle rough and/or run
extremely lean.

Let us know what you find out.  :)

Adam