[Shotimes] Question about MAF, and Sway bars..

[Dave Kegel]

Yes, that is the bad MAF.

The bars from the 90 are 24mm front and 26mm rear.  I would put them on
the 95, it will make a noticeable difference.

Dave Kegel

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Marc Levy
Sent: Monday, September 13, 2004 8:00 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Question about MAF, and Sway bars..


First the MAF:

I purchased this MAF from FPS many years ago..  I
recall it was from a Mustang??  I measured it, one
side is 73mm the other is 80mm..  Is this the "bad"
one that I saw discussed on the list last week?  I
never even used the thing, and want to know if it will
do me any good on the 95 MTX.


Then the sway bars:

Also, was reading up on the sway bar messages last
week.  I dont know what is on the 95, but I think it
is stock..  I took the bars off of the 90, and I think
they are 25mm and 26mm..  Is it a good idea to install
them on the 95?  I find the 95 is like a boat compared
to the 90.. the 90 did have the Eibach springs, and
FPS aluminum subframe mounts... as well as what I
thought were derilin bushings on everything.


While I am doing all of this work.... is there such a
thing as a performance strut mount? Or are the ones at
NAPA good enough?

Thx.


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes