[Shotimes] Where to place 1 slightly weaker injector?

[Bruce Malachuk]

I just had a set of 3.2 injectors cleaned and flowed. I have one injector
that flows 1cc less at a simulated 2500rpm than the rest of the injectors.
They all flow the same under static flow. I was wondering if there is a
cylinder that is recomenned to put a slightly lesser flowing injector on? I
remember reading some thread/post somewhere about one cylinder that
sometimes runs a little leaner than the rest on a SHO, i think it was 3 or
something. Maybe it was something about ppl having burnt valves or pistons
problems that looks like the car had gone a little lean, and it seemed to be
a pattern on a particular cyclinder.
 
Thanks in advance.
 
Bruce J Malachuk

*	94 Opal Frost MTX 

*	93 Emerald Green MTX 

*	93 Black ATX - parts 

*	95 Silver Frost ATX SE - SLO