[Shotimes] Vibration or picky...again (update)

[Paul L Fisher]

It is a fairly big job! I watched it being done on my '93 and it seemed to
be harder than it should be. The key is that they press it in straight.


Paul L Fisher

Visit my website: http://www.paul-fisher.com
SHOClub Member: http://www.shoclub.com
Amsoil dealer: http://www.paul-fisher.com/oil

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of cmichaelo@optonline.net
Sent: Tuesday, April 26, 2005 4:28 PM
To: Leigh Smith
Cc: Tom Smith; shotimes; David Rosicke; Bill Strobel
Subject: Re: RE: [Shotimes] Vibration or picky...again (update)

OK, I took the plunge and removed both spindles to have the wheel bearings
and the hubs replaced.

I already have the wheel bearings and the hubs, but need to find a shop that
can do the job with an arbor press or something.

But I just totally have zero faith in any of the shops around here, incl the
Ford dealerships.

My question is, can a shop screw up the installation of a wheel bearing+hub?

Is there any way I can possibly do this myself?

Michael
94MTX,green,BOS+,Koni/Intrax,Baer,Corbeau
SHO items for sale: http://hometown.aol.com/cmichaelo/for_sale.html
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes