[Shotimes] lifting an engine

[Ian Fisher]

PS JVO-

Bolt the armature thingie from the stand to the
bellhousing while the block is on the floor. Now you
can just lift up the engine and slide the arms into
the stand. Easy as cake (if you have an engine hoist).
A bit of a PITA if you don't. :)

Ian


--- van Oss <vanOss@centurytel.net> wrote:

> I need to lift a 3.2L enough off the floor to attach
> an engine stand. 
> Intake and tranny are off.
> 
> There's a lift hook on the front of the engine, but
> what do I do on the 
> opposite corner?  I thought about using one of the
> bolts that normally holds 
> the tranny on (put the bolt through a chain link)?  
>  But wouldn't it be in 
> the way when it's time to bolt on the stand?
> 
> VO 
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> 



		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs