[Shotimes] difference between SHO and SLO ATX Pan

[Robert Bruce]

OOOPPS.  That number is an SHO 3.2L engine oil pan.  The atx tranny pan is F3DZ7A194A. Like Alan asks, why do you feel the need to
replace the pan?

Bob Bruce
92 w/ a mod or two 

 
-----Original Message-----
From: Eric Wieland [mailto:ewieland@mchsi.com] 
Sent: Wednesday, December 07, 2005 9:46 PM
To: 'Robert Bruce'
Subject: RE: [Shotimes] difference between SHO and SLO ATX Pan

Bob,
Do you know if the only difference was the SHO stamping?  Thank you very
much for the part number.
Eric


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Robert Bruce
Sent: Wednesday, December 07, 2005 8:35 PM
To: 'Eric Wieland'; '_SHOtimes'
Subject: RE: [Shotimes] difference between SHO and SLO ATX Pan

I believe the SHO pan is F3DZ6675A.

Bob Bruce
92 w/ a mod or two 

 
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Eric Wieland
Sent: Wednesday, December 07, 2005 10:02 AM
To: '_SHOtimes'
Subject: [Shotimes] difference between SHO and SLO ATX Pan

I am trying to fix a leaking ATX pan I found while changing my rod bearings.
Is there a difference between the SHO and SLO ATX pan other than SHO stamped
in the bottom?  I know they use the same cork gasket.  I remember reading
that the SHO pan was a deeper pan than the SLO.  Does anyone have a part
number for the SHO pan?  The only part number I can find right now is
E6DZ-7A194-A which is a standard SLO pan.

Thanks,
Eric
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes