[Shotimes] oil cooler

[Ian Fisher]

I wonder how effective a second PS cooler mounted in
the a similar position would work if it was plumbed to
fit the in/out barbs on the oil cooler. It would
probably run a lot cooler, thus cooling the oil a bit
more. Maybe too much though..

What's the part number of the kit you bought?

Ian


--- Zach Leahy <leahyz@gmail.com> wrote:

> Hey folks,
> 
> I have always hated the location of the oil filter,
> and the inadequacy
> of the oil/water cooler.  I usually see oil teps
> around 220-250
> degrees on a hot day.  Especially in slow traffic. 
> the oil temp will
> soar well above the water temp and I often wondered
> about the
> effectivnedd of the oil/water cooler.
> 
> Well, I fixed that problem and picked up a B&M
> remote filter and
> cooler.  I have not gotten to installing it yet, but
> I will sometime
> soon and I will post some pictures.  I was more in
> for the remote
> filter so i selected a rather small cooler designed
> for 4cyl imports. 
> The flow rating is really good still as it is a bar
> and plate setup. 
> Best part is the kit is like 110 bucks from summit
> or Jegs.
> 
> anyone interested in the P/N.
> 
> Later all
> 
> Z
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> 



	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail