[Shotimes] MAFs

[Jason Hartberger]

Um... oh, for the love of god, here's the URL! lol (I'm sick of 
explaining!) http://tinyurl.com/6flbs it *is* programmed for a stock 5.0 
mustang... but you're the only one that says it's gonna work... sheesh!

Jason


Mark Nunnally wrote:

>If it's programmed for a stock (850 kg/hr) 5.0L mustang, then it'll work
>fine with the SHO.  Both cars share the same MAF curve.
>
>The MAF output is matched to the MAF curve that's set up in the EEC, and has
>really nothing to do with the injector size, displacement, # of cylinders,
>etc.
>
>mark
>
>  
>
>>how, uh, cheap are we talking about? And, I, uh, placed a bid on this
>>MAF like 3 days ago before I asked any questions about it, and it looks
>>like I might win it (the only friggin' time)... if I win it, can I send
>>the electronics back to Pro-Flow and have them reprogram it? Also, I
>>heard somewhere that I can just swap my stock electronics onto the new
>>MAF... is this baloney? I do have an LPM....
>>
>>Jason
>>
>>Alan Fanning wrote:
>>
>>    
>>
>>>You should be able to find a ProM 75mm bullet MAF on eBay for about $170
>>>      
>>>
>or
>  
>
>>>so. That's what they used to sell for anyway. The Mustang calibration
>>>      
>>>
>would
>  
>
>>>be wrong because it's an 8 cyl engine. If you want cheap, and have an
>>>      
>>>
>LPM,
>  
>
>>>then get an 80mm Ford MAF. I have a spare I'd sell if you want to follow
>>>that route.
>>>
>>>   Alan
>>>
>>>wrote:
>>>
>>>
>>>
>>>      
>>>
>>>>Message: 5
>>>>Date: Sun, 02 Jan 2005 02:41:38 -0500
>>>>From: Jason Hartberger <at3hartberger@mail.com>
>>>>Reply-To: at3hartberger@mail.com
>>>>Organization: US Navy
>>>>To: Bob <bob@hotpursuit.net>, Shotimes Mailing List
>>>> <Shotimes@autox.team.net>
>>>>Subject: Re: [Shotimes] MAFs
>>>>
>>>>see, the problem with that is that MAFs on Ebay are like $120, while
>>>>MAFs from Pro-M are like $250... is the "less optimal" factor worth the
>>>>extra $130 (which I really don't have)?
>>>>
>>>>Jason
>>>>
>>>>
>>>>Bob wrote:
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>>>When Pro-Flow does a Pro-M MAF, they want to know what processor you're
>>>>>running and what mods on the engine.  So, the answer is that a Pro-M
>>>>>          
>>>>>
>MAF
>  
>
>>>>>calibrated to a Mustang processor and 24lb injectors would not be
>>>>>          
>>>>>
>optimal.
>  
>
>>>>>Instead, you should just call them, they do have a meter that will work
>>>>>          
>>>>>
>for
>  
>
>>>>>a SHO.
>>>>>
>>>>>
>>>>>          
>>>>>
>>>_______________________________________________
>>>Shotimes mailing list
>>>Shotimes@autox.team.net
>>>http://www.team.net/mailman/listinfo/shotimes
>>>      
>>>
>>_______________________________________________
>>Shotimes mailing list
>>Shotimes@autox.team.net
>>http://www.team.net/mailman/listinfo/shotimes
>>    
>>
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes