[Shotimes] hypothetical

[Alan Fanning]

There's a simple solution to Lee's question:  instead of moving the car
body, you just jack it up after setting the subframe down on a wheeled
dolly. Then just pull the dolly with drivetrain out from under the car. Of
course, when I did this I had the luxury of not intending to re-install the
drivetrain back in the car, so I cut out the radiator header panel and other
hardware at the front of the car to reduce the height I had to jack up the
car. But the principal is the same.

    alan

>> Opinions?  If it were your car to fix, would you drop the whole

> 
> PS:
> Getting the subframe on the floor is the easy part.
> How do you lift & move a 2500 lb body away from it without a regular car
> lift??
> With only 2 working wheels?
> Or do have access to a lift?
> 
> Lee